ME-218-F STEAM & POWER GENERATION LAB

List of Experiments:

1. To study low pressure boilers and their accessories and mountings.

2. To study high pressure boilers and their accessories and mountings.

3. To prepare heat balance sheet for given boiler.

4. To study the working of impulse and reaction steam turbines.

5. To find dryness fraction of steam by separating and throttling calorimeter.

6. To find power out put & efficiency of a steam turbine.

7. To find the condenser efficiencies.

8. To study and find volumetric efficiency of a reciprocating air compressor.

9. To study cooling tower and find its efficiency.

10. To find calorific value of a sample of fuel using Bomb calorimeter.

11. Calibration of Thermometers and pressure gauges.

Note:

1. At least ten experiments are to be performed in the semester.

2. At least eight experiments should be performed from the above list. Remaining two experiments may either be performed from the above list or designed & set by the concerned institute as per the scope of the syllabus.

Related posts:

1. MDU Syllabus | F-Scheme | ME-210-F STEAM & POWER GENERATION
2. ME- 216 E ENERGY CONVERSION LAB
3. MDU Syllabus | F-Scheme | ME-212-F KINEMATICS OF MACHINES LAB

ME-216-F FLUID MECHANICS LAB

List of Experiments:

1. To determine the coefficient of impact for vanes.

2. To determine coefficient of discharge of an orificemeter.

3. To determine the coefficient of discharge of Notch (V and Rectangular types).

4. To determine the friction factor for the pipes.

5. To determine the coefficient of discharge of venturimeter.

6. To determine the coefficient of discharge, contraction & velocity of an orifice.

7. To verify the Bernoullis Theorem.

8. To find critical Reynolds number for a pipe flow.

9. To determine the meta-centric height of a floating body.

10. To determine the minor losses due to sudden enlargement, sudden contraction and bends.

11. To show the velocity and pressure variation with radius in a forced vertex flow.

12. To verify the momentum equation.

Note:

1. At least ten experiments are to be performed in the semester.

2. At least eight experiments should be performed from the above list. Remaining two experiments may either be performed from the above list or designed & set by the concerned institute as per the scope of the syllabus.

Related posts:

1. ME- 214 E FLUID MECHANICS LAB
2. UPTU Syllabus of Fluid Mechanics Lab
3. PTU Syllabus | ME-214 FLUID MECHANICS- I Lab