EE-322-E MICROWAVE LAB

CLASS WORK : 25
EXAM : 25

LIST OF EXPERIMENTS :

1. Study of wave guide components.

2. To study the characteristics of reflex Klystron and determine its timing range.

3. To measure frequency of microwave source and demonstrate relationship among guide dimensions, free space wave length and guide wavelength.

4. To measure VSWR of unknown load and determine its impedance using a smith chart.

5. To match impedance for maximum power transfer using slide screw tuner.

6. To measure VSWR, insertion losses and attenuation of a fixed and variable attenuator.

7. To measure coupling and directivity of direction couplers.

8. To measure insertion loss, isolation of a three port circulator.

9. To measure the Q of a resonant cavity.

10. To study the V-I characteristics of GUNN diode.

NOTE : Ten experiments have to be performed in the semester. At least seven experiments should be performed from above list. Remaining three experiments may either be performed from the above list or designed & set by the concerned institution as per the scope of the syllabus of EE-302-C.

Related posts:

1. EE-302-E MICROWAVE AND RADAR ENGINEERING
2. EE-221-E ELECTRICAL ENGINEERING MATERIALS AND SEMICONDUCTOR DEVICES LAB
3. EE-331-E ELECTRONICS CIRCUIT SIMULATION LAB

EE-330-E DIGITAL SYSTEM DESIGN LAB

CLASS WORK : 25
EXAM : 25

LIST OF EXPERIMENTS:

1. Design all gates using VHDL.

2. Write VHDL programs for the following circuits, check the wave forms and the hardware generated

1. half adder
2. full adder

3. Write VHDL programs for the following circuits, check the wave forms and the hardware generated

• a. multiplexer
• b. demultiplexer

4. Write VHDL programs for the following circuits, check the wave forms and the hardware generated

a. decoder

b. encoder

5. Write a VHDL program for a comparator and check the wave forms and the hardware generated

6 Write a VHDL program for a code converter and check the wave forms and the hardware generated

7. Write a VHDL program for a FLIP-FLOP and check the wave forms and the hardware generated

8. Write a VHDL program for a counter and check the wave forms and the hardware generated

9. Write VHDL programs for the following circuits, check the wave forms and the hardware generated

a. register

b. shift register

10. Implement any three (given above) on FPGA/CPLD kit

Note : Ten experiments are to be performed out of which at least seven experiments should be performed from above list. Remaining three experiments may either be performed from the above list or designed & set by the concerned institution as per the scope of the syllabus.

Related posts:

1. DIGITAL SYSTEM DESIGN LAB
2. CSE-411- E COMPILER DESIGN LAB
3. EE-310-E DIGITAL SYSTEM DESIGN