EE-231-E ELECTRICAL WORKSHOP
CLASS WORK : 25
EXAM : 25
LIST OF EXPERIMENTS:
1. Introduction of tools, electrical materials, symbols and abbreviations.
2. To study stair case wiring.
3. To study house wiring i.e., batten, cleat, casing-caping and conduit wirings.
4. To study fluorescent tube light.
EE-225-E ELECTROMECHANICAL ENERGY CONVERSION LAB
CLASS WORK : 50
EXAM : 50
LIST OF EXPERIMENTS:
1. To find turns ratio and polarity of a single phase transformer.
2. To perform open and short circuit tests on a single phase transformer.
3. To perform Sumpner’s back to back test on single phase transformers.
4. Parallel operation of two single phase transformers.
EE-223-E NETWORK THEORY LAB
CLASS WORK : 25
EXAM : 25
LIST OF EXPERIMENTS :
1. Transient response of RC circuit.
2. Transient response of RL circuit.
3. To find the resonance frequency, Band width of RLC series circuit.
4. To calculate and verify "Z" parameters of a two port network.
EE-221-E ELECTRICAL ENGINEERING MATERIALS AND SEMICONDUCTOR DEVICES LAB
CLASS WORK : 25
EXAM : 25
LIST OF EXPERIMENTS :
1. To study V-I characteristics of diode, and its use as a capacitance.
2. Study of the characteristics of transistor in Common Base configuration.
3. Study of the characteristics of transistor in Common Emitter configuration.
EE-205-E ELECTROMECHANICAL ENERGY CONVERSION
CLASS WORK : 50
EXAM : 100
UNIT 1 MAGNETIC CIRCUITS AND INDUCTION:
Magnetic Circuits, Magnetic Materials and their properties, static and dynamic emfs and force on current carrying conductor, AC operation of Magnetic Circuits, Hysteresis and Eddy current losses.
UNIT 2 PRINCIPLES OF ELECTROMECHANICAL ENERGY CONVERSION:
Force and torque in magnetic field system, energy balance, energy and force in singly excited magnetic field system, concept of co-energy, forces and torques in system with permanent magnets, dynamic equation.
EE-203-E NETWORK THEORY
CLASS WORK : 50
EXAM : 100
UNIT I TRANSIENT RESPONSE :
Transient Response of RC, RL, RLC Circuits to various excitation signals such as step, ramp, impulse and sinusoidal excitations using laplace transform.
UNIT 2 NETWORK FUNCTIONS :
Terminal pairs or Ports, Network functions for one-port and two-port networks, poles and zeros of Network functions, Restrictions on pole and zero Locations for driving point functions and transfer functions, Time domain behavior from the pole-zero plot.