Engineering Tutorials

ME- 211- F COMPUTER AIDED DESIGN LAB

The students will be required to carry out the following exercises using educational software (AutoCAD, I-DEAS, Pro-Engineer etc).

1. Setting up of drawing environment by setting drawing limits, drawing units, naming the drawing, naming layers, setting line types for different layers using various type of lines in engineering drawing, saving the file with .dwg extension.

2. Layout drawing of a building using different layer and line colors indicating all Building details. Name the details using text commands, Make a title Block.

3. To Draw Orthographic projection Drawings (Front, Top and side) of boiler safety valve giving name the various components of the valve.

4. Make an Isometric dimensioned drawing of a connecting Rod using isometric grid and snap.

5. Draw quarter sectional isometric view of a cotter joint.

6. Draw different types of bolts and nuts with internal and external threading in Acme and square threading standards. Save the bolts and nuts as blocks suitable for insertion.

7. Draw 3D models by extruding simple 2D objects, dimension and name the objects.

8. Draw a spiral by extruding a circle.

Note:-1. At least seven experiments are to be performed in the semester. 2. At least five experiments should be performed from the above list. Remaining two experiments may either be performed from the above list or designed & set by the concerned institute as per the scope of the syllabus.

Related posts:

1. ME – 211 E COMPUTER AIDED DRAFTING LAB.
2. MDU Syllabus | F-Scheme | ME- 203-F COMPUTER AIDED DESIGN
3. PTU Syllabus | ME-321 Computer Aided Drafting Lab
4. MDU Syllabus | F-Scheme | ME- 215-F MATERIAL SCIENCE LAB.
5. ME- 402 E COMPUTER AIDED DESIGN