Engineering Tutorials

EE-325-E ANALOG ELECTRONIC CIRCUITS LAB

CLASS WORK : 25
EXAM : 25

LIST OF EXPERIMENTS:

1. Design & measure the frequency response of an RC coupled amplifier using discrete components.

2. Design a two stage RC coupled amplifier and determine the effect of cascading on gain and bandwidth

3. Study the effect of voltage series, current series, voltage shunt, and current shunt feed-back on amplifier using discrete components.

4. Design & realize inverting amplifier, non-inverting and buffer amplifier using 741 Op Amp.

5. Verify the operation of a differentiator circuit using 741 op amp and show that it acts as a high pass filter.

6. Verify the operation of a integrator circuit using 741 op amp and show that it acts as a low pass filter.

7. Design and verify the operations of op amp adder and subtractor circuits.

8. Plot frequency response of AC coupled amplifier using op amp 741 and study the effect of negative feedback on

the bandwidth and gain of the amplifier.

9. Design & realize using op amp 741, Wein -bridge oscillator.

10. To design & realize using op amp 741, square wave generator.

11.To design & realize using op amp 741, logarithmic amplifier & VCCS.

NOTE: At least ten experiments are to be performed. Seven experiments should be performed from the above

list and the remaining three experiments can be either from the above list or set by the concerned institution as per the scope of the syllabus of EE-305-C.

Related posts:

1. EE-305-E-ANALOG ELECTRONIC CIRCUITS
2. EE-222-E ANALOG ELECTRONICS-LAB
3. EE-224-E DIGITAL ELECTRONICS LAB
4. EE-323-E ELECTRONIC MEASUREMENT AND INSTRUMENTATION-LAB
5. EE-224-E DIGITAL ELECTRONICS LAB